Analysis Sonoff

SONOFF SenseGuard sensors add Thread, Zigbee and Wi-Fi Matter

SONOFF's SenseGuard DW Gen3 is on sale at $22.90 as a Matter over Thread or Zigbee door sensor. A matching Motion Gen3 is Matter-certified and still listed as coming soon, and the Presence Core 24G joins Matter over Wi-Fi for $24.90.

Announced 6 min read
  • Matter 1.5
  • Thread
  • Wi-Fi
  • Zigbee
Flat pastel illustration of a slim door sensor above a door handle, a small motion sensor on the wall and a compact presence sensor on a side table

Key takeaways

  • The DW Gen3 and Motion Gen3 run Thread or Zigbee โ€” switching modes factory-resets the device.
  • Both dual-protocol sensors are Matter-certified; tamper alerts are not available in Thread mode.
  • The Presence Core 24G is shipping now, but over Matter it only exposes occupancy and illuminance.

What's new

The SenseGuard DW Gen3 door and window sensor (SNZT-04P) and the companion SenseGuard Motion Gen3 (SNZT-03P) use IEEE 802.15.4 for both Zigbee 3.0 and Thread, but only one mode at a time. In Thread mode they speak Matter and can join a Matter controller without a SONOFF gateway, as long as you already have a Thread border router. In Zigbee mode they need a Zigbee hub or dongle. Switching modes factory-resets the device.

The DW Gen3 and Motion Gen3 are Matter-certified for use over Thread. The Motion Gen3 is still listed as coming soon on SONOFF's IFA 2026 page.

The SenseGuard Presence Core 24G (SNWF-06P24) is different: Wi-Fi instead of Thread, and no Zigbee radio. SONOFF documents it as Matter over Wi-Fi. For how the transports compare, see the Matter, Thread, Zigbee, and Z-Wave guide.

Hardware and specs

SNZT-04P
SONOFF SenseGuard DW Gen3
Type
Door / window contact
Radio
Thread or Zigbee
Power
2 ร— AAA, up to 15 months (Thread)
SNZT-03P Coming soon
SONOFF SenseGuard Motion Gen3
Type
Motion / occupancy sensor
Radio
Thread or Zigbee
Power
Not yet listed
SNWF-06P24
SONOFF Presence Core 24G
Type
24 GHz radar presence
Radio
Wi-Fi
Power
USB-C, 5 V / 1 A

The DW Gen3 contact sensor uses a TL3238 microcontroller and ships as a transmitter-and-magnet pair. The transmitter measures 90 ร— 26 ร— 13.5 mm; the magnet is 31 ร— 14 ร— 6.5 mm. It weighs 45.1 g with two standard LR03 AAA cells, which SONOFF rates at up to 15 months in Thread mode. It reports open and closed from the gap between the body and the magnet: up to 30 mm horizontally, or 15 mm vertically. The magnet can also be removed from its housing when a frame is tight or uneven. A tamper contact is built in, but that alert does not appear in Thread mode. SONOFF rates open-area range at 100 meters and specifies indoor use at -10ยฐC to 60ยฐC (14ยฐF to 140ยฐF).

As of November 17, 2026, there is no US product page, help article, or store price for the Motion Gen3. SONOFF's IFA 2026 "Coming Soon" section groups it with the door and window model as the start of a Zigbee and Thread sensor series. Detection range, battery type, light sensing, and price remain unconfirmed.

The Presence Core is already shipping. This presence sensor uses an ESP32-C6, talks on 2.4 GHz Wi-Fi, and is powered over USB-C at 5 V / 1 A. The housing is 44.2 ร— 44.2 ร— 59 mm and weighs 34.5 g. A 24 GHz FMCW radar covers about 4 meters radially at a 120ยฐ detection angle, split into seven zones you can turn on or off individually. SONOFF's Detection Calibration filters fixed, regular motion such as fans or water pipes. It will not filter pets or robot vacuums, and it cannot reliably detect a sleeping person. A completely still person is best detected within 3 meters and facing the device. A light sensor reports lux, with an offset of up to ยฑ1000 lux. Zone setup, calibration, logs, and firmware updates live in the local OpenEdge web console at SNWF-06P24.local or the device's LAN IP. Home Assistant can also connect through MQTT, WebSocket, or SONOFF's open API.

Thread versus Zigbee mode

On first power-up, the DW Gen3 enters Thread pairing by default, with the green LED flashing slowly for up to 10 minutes. You add it by scanning the Matter QR code in a Matter app, with a Thread-capable Matter hub from that platform already on the network.

Press the button five times to switch to Zigbee. That also resets the device and starts Zigbee pairing (red LED, three minutes). Press five times again to return to Thread; look for the green indicator. Hold the button for five seconds to reopen a pairing window. Hold it for 10 seconds until the LED flashes five times quickly for a factory reset. SONOFF's help FAQ notes that a 10-second reset also removes existing Matter fabric connections.

Thread mode Zigbee mode
Pairing Matter controller with a Thread border router Zigbee gateway or dongle
Switching Press the button five times โ€” resets the device Press the button five times โ€” resets the device
Tamper alerts Not available on any Matter platform On recommended SONOFF hubs and Home Assistant
Firmware Matter OTA Gateway, ZHA, or Zigbee2MQTT OTA after v1.0.7

The main Thread-mode gap is tamper, which SONOFF marks as unavailable on every Matter platform it lists, including Home Assistant. If you want a removal alert, use Zigbee mode on a gateway that exposes it. SONOFF's current recommended hubs (ZBBridge-P, ZBBridge-U, NSPanel Pro, and iHost) and Home Assistant do; Alexa Echo Zigbee hubs and the original ZBBridge do not. Battery level in Thread mode appears in Apple Home, Google Home, SmartThings, and Home Assistant, but not in Alexa or eWeLink.

In Zigbee mode, open and close status is widely supported. SONOFF also lists its dongles for ZHA and Zigbee2MQTT, though ZHA and SmartThings currently need a script from SONOFF. You can add the sensor to eWeLink directly only in Zigbee mode; after a Thread/Matter join, you can share it into eWeLink. SONOFF says its own gateways are not Thread border routers.

The Presence Core is not part of this protocol choice. It stays on Wi-Fi, can remain on eWeLink or the local console and a Matter fabric at the same time, and exposes only occupancy and illuminance to Matter. A Thread border router is not required.

Feature support by platform

The tables below are from SONOFF's published help-center feature lists. SONOFF has not published a platform list for the Motion Gen3 yet.

Feature Apple Home Google Home Alexa SmartThings Home Assistant
DW Gen3 ยท Thread mode
Open / close Supported Supported Supported Supported Supported
Battery status Supported Supported Not supported Supported Supported
Tamper status Not supported Not supported Not supported Not supported Not supported
Share via Matter pairing window Supported Supported Supported Supported Supported
Presence Core 24G ยท Wi-Fi
Occupancy Supported Supported Supported Supported Supported
Illuminance Supported Supported Supported Supported Supported
Supported Not supported

Firmware updates

In Thread mode, the DW Gen3 supports Matter OTA. In Zigbee mode it supports OTA through a SONOFF gateway, ZHA, or Zigbee2MQTT, but only after firmware v1.0.7. Presence Core firmware is updated from the local web console under Firmware Manage.

Heads-up: Units still on firmware v1.0.6 should use Quick OTA first: triple-press the button, then go to eWeLink > Profile > Pilot Features > Bluetooth OTA Update. Zigbee OTA works only from v1.0.7.

Pricing and availability

The DW Gen3 is $22.90 on SONOFF's US store and is listed as in stock. The Presence Core 24G is $24.90 on the same store, also listed as in stock. Those are the manufacturer's US list prices, tax included. The product pages do not include Amazon buy links.

The Motion Gen3 is still listed as coming soon. SONOFF has not published a US price or sale date on sonoff.tech.

Product Matter Connectivity Price Buy
SONOFF SenseGuard DW Gen3
SNZT-04P
Matter 1.5 Thread / Zigbee See the price on Amazon Check price
SONOFF SenseGuard Motion Gen3
SNZT-03P
Matter 1.5 Thread / Zigbee TBA Coming soon
SONOFF Presence Core 24G
SNWF-06P24
Matter 1.5 Wi-Fi See the price on Amazon Check price

Who should buy which

  • Apple or Google Home with a Thread border router
    DW Gen3 in Thread mode โ€” native Matter, plus battery level, in Apple Home, Google Home, SmartThings, or Home Assistant. No SONOFF hub needed.
  • Already running a Zigbee gateway
    DW Gen3 in Zigbee mode โ€” keeps tamper alerts, eWeLink scenes, and an existing SONOFF, ZHA, or Zigbee2MQTT network.
  • Want a matching battery motion sensor
    Wait for the Motion Gen3 store listing โ€” it is Matter-certified, but the published specifications and price are still missing.
  • Room presence without batteries
    Presence Core 24G โ€” USB-powered sitting-still occupancy and light-aware automations over Wi-Fi Matter; no Thread border router needed. Skip it if you need reliable sleep detection, and aim the sensor so pets stay out of the beam.

For other mmWave options, see the Matter presence sensor guide.

As an Amazon Associate, we earn from qualifying purchases. Product links on this page are affiliate links; they do not change the price you pay. Prices may change after publication.