Analysis SwitchBot

SwitchBot Hub 4 adds voice and a screen but stays a Matter bridge

SwitchBot Hub 4 adds Hello Kata voice control, a 2.8-inch screen and a dial, but for Matter it is still a 30-device bridge with no Thread radio. What changed from Hub 3, platform support, and who should buy it.

Announced 7 min read
  • Matter 1.3
  • Wi-Fi
  • Bluetooth
Flat illustration of a small square smart home hub with a screen and dial on a side table, next to a mug, a potted plant and a curtained window

Key takeaways

  • SwitchBot Hub 4 adds a "Hello Kata" voice assistant, a 2.8-inch color screen, four shortcut buttons and a dial to the Hub 3 formula.
  • On the Matter side, it is a Matter bridge (Bridge 1.3) for up to 30 sub-devices, and three of those slots go to the hub's own sensors.
  • It has no Thread radio. It cannot be your Thread border router, and Thread devices still need a HomePod, Apple TV, Nest hub or similar.
  • MSRP is $119.99, the same as Hub 3. SwitchBot's US store is taking preorders that ship in early December.

What's new

SwitchBot announced Hub 4 on November 16, 2026. It is the company's new flagship hub: an IR blaster, Bluetooth gateway and Matter bridge in a tabletop box with a screen and a knob. The headline change is voice. Say "Hello Kata" and the hub can switch SwitchBot devices and IR appliances, answer questions about your home, and run scenes you have already built in the SwitchBot app. SwitchBot also lists support for selected streaming boxes, including Apple TV, Fire TV and Android TV.

SwitchBot Hub 4 seen from the front, with a dark square display showing two round "eyes" above a large rotary knob on a small stand
Image: SwitchBot

For Matter users, the more important question is where the hub fits. Hub 4 keeps the job Hub 3 already does. It joins Apple Home, Google Home or another Matter platform as a bridge, then passes your Bluetooth SwitchBot devices through to that platform, such as Curtain 3, Blind Tilt, locks and sensors. It does not add Thread, and it does not replace a Matter controller.

Hardware and specs

Products That Matter does not list Hub 4 yet, so the cards below cover the hubs and bridged devices it replaces or works with. The table after them puts Hub 4 next to the SwitchBot hubs already on the market, using figures from SwitchBot's product pages and launch announcement.

SwitchBot Hub 3
Role
Matter bridge, IR hub
Matter sub-devices
Up to 30
Radio
2.4 GHz Wi-Fi, Bluetooth LE
SwitchBot Hub 2 Matter Smart Hub
Role
Matter bridge, IR hub
Matter sub-devices
Up to 8
Radio
2.4 GHz Wi-Fi, Bluetooth LE
SwitchBot Curtain 3 (Rod)
Role
Curtain robot
Matter
Through a SwitchBot hub
Radio
Bluetooth
SwitchBot Presence Sensor
Role
mmWave presence sensor
Matter
Through a SwitchBot hub
Radio
Bluetooth
Hub 4 Hub 3 Hub 2
Matter role Bridge (Matter Bridge 1.3) Bridge Bridge
Max Matter sub-devices 30, including 3 built-in sensor entries 30 8
Display 2.8-inch color IPS display Digital display
Physical controls 4 on-screen shortcuts + dial 4 buttons + dial 2 buttons
Built-in voice assistant Hello Kata No No
Built-in sensing Motion, temperature, humidity Motion, temperature, humidity, light Temperature, humidity, light
Radios 2.4 GHz Wi-Fi, Bluetooth 2.4 GHz Wi-Fi, Bluetooth LE 2.4 GHz Wi-Fi, Bluetooth LE
Thread border router No No No

The voice hardware is two omnidirectional microphones, which SwitchBot says can pick up the wake word from about three meters away. You can also wake the hub by hand. A 2 W speaker handles replies. The hub can stand on a table or mount on a wall, and it runs on USB-C power from the included 5 V / 2 A adapter.

The IR library covers more than 101,000 appliance models, with automatic matching. SwitchBot says IR commands keep working locally after matching, even when the internet is down. That does not apply to voice. SwitchBot's help center says speech recognition, weather and most device control need an internet connection, so Hello Kata is a cloud assistant, not a local one.

SwitchBot Hub 4 at an angle on its stand, showing the slim display, the knob and the USB-C cable at the back
Image: SwitchBot

How the Matter bridge works

You add Hub 4 to your Matter platform once. In the SwitchBot app, you then pick which SwitchBot devices to sync through the hub, and they appear as separate accessories. SwitchBot's bridge guide has the same flow for each platform: update the hub's firmware, add the bridge to the platform's controller, then sync accessories from the hub's Matter Setup page.

The 30-device cap is shared. SwitchBot counts the hub's motion, temperature and humidity sensors as three default entries, which leaves 27 slots for curtains, blinds, locks, plugs and sensors. If you already run more than that, you will need a second bridge or will have to leave some devices in the SwitchBot app.

Hub 4 also works in the other direction. SwitchBot says you can add Hub 4 to the Home app through Matter and use it to control up to 30 wireless remotes and Matter devices with a single tap, and the launch announcement says compatible third-party Matter devices can be controlled through the Home app's Wireless Remote feature. On its Hub 3 page, SwitchBot gives Hue and IKEA lights as examples of third-party Matter devices this kind of control can reach. SwitchBot adds that available devices and functions vary by device and platform.

Feature Apple Home Google Home Alexa SmartThings Home Assistant
Hub 4 as a Matter bridge
Add the hub and sync SwitchBot devices Supported Supported Partial Partial Partial
Hub's motion, temperature and humidity sensors Supported Supported Partial Partial Partial
Controlling other Matter devices from Hub 4
Wireless Remote for third-party Matter devices Supported Not supported Not supported Not supported Not supported
Supported Partial Not supported
Heads-up: SwitchBot's bridge guide gives step-by-step Matter instructions for Apple Home, Google Home and SmartThings. Its SmartThings list names Hub Mini Matter Enabled, Hub 2, Hub 3 and AI Hub but not Hub 4 yet, and SwitchBot says Hub 3 can bridge to Home Assistant. That is why those columns are marked partial. Alexa has long been able to control SwitchBot devices through SwitchBot's cloud skill, which is a different route from Matter. SwitchBot describes third-party control only for Apple Home.

Thread vs Wi-Fi: what Hub 4 doesn't do

SwitchBot lists only 2.4 GHz Wi-Fi and Bluetooth for Hub 4, the same radios as Hub 3. Its bridged devices are Bluetooth gadgets that reach Matter through the hub's Wi-Fi connection. That has a few practical consequences:

  • It is not a Thread border router. If you buy Matter-over-Thread products such as Aqara's new lights, Eve sensors or Nanoleaf bulbs, you still need a border router from your platform. Examples are a HomePod mini, an Apple TV 4K, a Nest Hub (2nd gen), or the 2026 Echo Dot. Our hubs and border routers guide covers the options, and The Rise of Thread explains why more new devices are moving that way.
  • Everything bridged depends on one box. If Hub 4 is offline, the curtains and sensors behind it disappear from Apple Home or Google Home. Native Thread or Wi-Fi Matter devices don't have that single point of failure.
  • Feature coverage is SwitchBot's call. A bridge exposes what its firmware maps to Matter device types. Basic open/close, on/off and sensor readings come through. Device-specific extras usually stay in the SwitchBot app.

The upside is that SwitchBot's Bluetooth devices are cheap, run on batteries for a long time, and don't need a Thread network. If you already own several, a bridge is the simplest way to get them into a Matter home. For background on how the transports differ, see our Matter, Thread, Zigbee and Z-Wave explainer.

What you need

  • A 2.4 GHz Wi-Fi network. Hub 4 does not use 5 GHz.
  • The SwitchBot app, for setup, automations, scenes and choosing which devices to bridge. Kata can run existing scenes, but you can't create or edit automations by voice.
  • A Matter controller for the platform you use, if you want Matter at all. For Apple Home that means a HomePod or Apple TV acting as the home hub. For Google Home, a Nest speaker or display.
  • An internet connection for Hello Kata, weather and remote control. IR commands keep working locally.

Firmware and updates

Hub 4 gets updates through the SwitchBot app. SwitchBot's Matter guide asks you to update the hub and the platform's controller before setting up the bridge, which is worth doing on day one. Bridged devices reach Matter through the hub, so the hub's firmware decides which SwitchBot products and features appear in your Matter app.

Warning: Moving SwitchBot devices from a Hub 2 or Hub 3 bridge to Hub 4 means syncing them again from the new hub. Apple Home or Google Home may then show them as new accessories, so check rooms, names, scenes and automations that use them.

Pricing and availability

SwitchBot's US MSRP for Hub 4 is $119.99, the same as Hub 3. The launch prices are CAD 149.99, GBP 129.99 and EUR 129.99. SwitchBot says Hub 4 is sold through its own website and Amazon in the US, Canada, the UK and Europe. Its US store is taking preorders, with shipping expected in early December. Products That Matter will add Hub 4 to the catalog once a US listing is confirmed. Current prices for Hub 3, Hub 2 and the bridged devices mentioned here are below.

Product Matter Connectivity Price Buy
SwitchBot Hub 3 Matter 1.3 Wi-Fi / Bluetooth $119.99 Check price
SwitchBot Hub 2 Matter Smart Hub Matter Wi-Fi / Bluetooth $59.99 Check price
SwitchBot Curtain 3 (Rod) Matter Bluetooth $89.99 Check price
SwitchBot Presence Sensor Matter Bluetooth $29.99 Check price

Who should buy which

  • New to SwitchBot, wants voice and a screen
    Hub 4: one box for IR, Bluetooth devices and Matter, with Kata.
  • Already own Hub 3
    Keep it: same 30-device bridge and dial. Kata is the main gain.
  • Only a few devices to bridge
    Hub 2: up to 8 Matter sub-devices, for less money.
  • Building on Thread
    Buy a border router: Hub 4 has no Thread radio.

Hub 4 is a sensible update to SwitchBot's hub line, but for Matter it changes little. It is a 30-device bridge with a nicer screen and its own voice assistant. If you were hoping SwitchBot's next hub would add Thread, keep waiting.

As an Amazon Associate, we earn from qualifying purchases. Product links on this page are affiliate links; they do not change the price you pay. Prices may change after publication.